D-C-Fix Ribbeck Oak Woodgrain Self Adhesive Vinyl Wrap Film - 45cm Width
Dc fix sticky back plastic designs are so authentic, you will hardly believe it’s a vinyl film. Re...Dc fix sticky back plastic designs are so authentic, you will hardly believe it’s a vinyl film. Rejuvenate a worktop or wrap kitchen doors in minutes, customise furniture like drawer fronts or wardrobe doors. This vinyl can save you thousands on buying new, simply cover what you have. Dc fix is a non-permanent DIY solution, perfect for tenants or landlords looking for a quick fix, the vinyl can be removed fairly easy, use a hairdryer to warm the vinyl first and peel back, any leftover residue can be removed using warm soapy water. Dc fix has a water based low tack adhesive, this allows the vinyl to be repositioned during application, unlike stronger solvent based adhesives. Simply pull the vinyl back and start again. This vinyl has a 5 star rating for adhesion, lightfastness, shrinkage and durability. High Quality dc fix is our preferred brand of vinyl film due to its 5* rating for adhesion, opacity, lightfastness, shrinkage and durability.
This guide is for anyone looking to refresh their furniture or surfaces with the D-C-Fix Ribbeck Oak Woodgrain Self Adhesive Vinyl Wrap Film. It's perfect for DIY projects, offering an easy way to rejuvenate worktops, doors, and furniture. A key benefit is the ability to customize your space without a permanent commitment. Keep in mind that while the adhesive is repositionable, ensuring proper application is key for a flawless finish.
All features
Model Part Number
200-3240-1
Brand
d-c-fix
Extended Product Information
FAQs
How do I remove the vinyl?
Use a hairdryer to heat the vinyl and soften the adhesive. Gently peel back the vinyl. Any remaining residue can be removed with warm, soapy water.
Can I use this on a textured surface?
It is best used on smooth, non-porous surfaces. Textured surfaces may not provide a good bond.
What tools do I need?
A measuring tape, scissors or a craft knife, a squeegee or soft cloth, and a hairdryer are recommended.
Is it waterproof?
It is water-resistant, but prolonged exposure to water may affect the adhesive.
Can I use this in a kitchen or bathroom?
Yes, it is suitable for use in kitchens and bathrooms, but ensure the surface is properly prepared and protected from excessive moisture.
How do I clean the vinyl?
Wipe with a damp cloth and mild detergent. Avoid using abrasive cleaners.
How long will it last?
The lifespan depends on usage and care. It has a 5-star rating for durability, but proper maintenance is essential.
Troubleshooting
Bubbles or creases appear after application
Gently lift the vinyl and reapply, smoothing out the bubbles with a squeegee or soft cloth. Use a pin to pierce stubborn bubbles and smooth them out.
Vinyl is not sticking properly
Ensure the surface is clean and dry. Use a hairdryer to warm the vinyl and reactivate the adhesive. Press firmly, especially around edges.
Edges are lifting
Use a hairdryer to heat the edges and press them down firmly. Trim any excess vinyl for a clean finish.
Pros and Cons
Pros
Easy to apply, saving time and effort.
Cost-effective alternative to buying new furniture.
Repositionable adhesive for easier application and correction.
Durable and long-lasting with a 5-star rating.
Removable, making it ideal for temporary updates.
Cons
Requires careful application to avoid bubbles and creases.
Surface preparation is essential for optimal adhesion.
May not be suitable for heavily textured or uneven surfaces.
Removal may require a hairdryer and leave some residue.
Not as durable as a permanent finish.
Setup, Compatibility & Care
Surface Preparation: Ensure the surface is clean, dry, and free from grease or dust. Lightly sand glossy surfaces to improve adhesion.
Application: Peel back a small section of the backing paper and apply the vinyl to the surface, smoothing out any bubbles or creases as you go. Use a squeegee or a soft cloth.
Repositioning: If you make a mistake, gently peel back the vinyl and reapply. The adhesive is designed to be repositionable.
Cutting: Use a sharp knife or craft knife to trim the edges, ensuring a clean finish.
Care: Clean the surface with a damp cloth and mild detergent. Avoid abrasive cleaners.
Compatibility: Suitable for most smooth, non-porous surfaces. Test in an inconspicuous area first.