Setup, Compatibility & Care
Setup:
- Ensure the surface is clean, dry, and free from dust, grease, or other contaminants.
- Measure and cut the vinyl using the grid on the reverse, allowing for a slight overlap if needed for seams.
- Peel back a small section of the backing paper.
- Carefully align the vinyl and apply it to the surface, gradually peeling back the backing paper as you go.
- Use a felt edge smoother to push out air bubbles and ensure firm adhesion.
- Trim any excess vinyl with a utility cutter.
Compatibility:
The vinyl adheres best to any flat, smooth, and non-porous surface. It is suitable for countertops, cabinet doors, furniture, shelves, and other similar applications. It is not recommended for direct contact with hot pans or surfaces exceeding 70ºC.
Care:
- Wipe clean with a damp cloth and mild soapy water.
- Wipe up spills immediately to prevent staining.
- Avoid abrasive cleaners or scrubbing pads, which can damage the surface.
- For areas around sinks and hobs, apply a suitable sealant around the edges to prevent water or dirt from getting underneath and lifting the vinyl.