Best current price£7.36from Power Tools Direct
Shopping.co.uk recommended and popular offers
Power Tools Direct£7.36Visit shop Liberon White 126726 Palette Wood Dye 250Ml
Visit shop
Amazon£9.40Visit shop Liberon Palette Wood Dye White 250ml
Visit shop27 offers from £7.36 - £78.05
View price history by clicking the chart icon.
Liberon Palette Wood Dye is a water-based acrylic dye designed for colouring interior bare wood while preserving the natural grain's appearance. It is ideal for DIY enthusiasts and professionals seeking to enhance wood surfaces before applying oil, wax, varnish, or French polish finishes. A key benefit is its ability to create custom shades by mixing colours, though users should note it is strictly for interior use.
| Colour | White |
|---|---|
| Model Part Number | 126726 |
| Brand | Liberon |
No, Liberon Palette Wood Dye is designed for use on bare, interior wood only. The existing finish must be completely removed before application.
Tools used for application can be cleaned easily with water immediately after use.
The coverage is approximately 8-16 square metres per litre, depending on the porosity of the wood and the application method.
Yes, the wood shades can be mixed together to create unique, custom colours to suit your project.
No, Liberon Palette Wood Dye is strictly for interior use only and is not weather-resistant.
The minimum drying time between coats is 2 hours. Ensure adequate ventilation and room temperature for optimal drying.
The dye is suitable for use prior to applying oil, wax, varnish, and French polish finishes.
Ensure the wood is properly prepared and sanded. Apply the dye in thin, even coats, avoiding over-application in any one area. Wipe off excess dye if necessary with a clean cloth after a short penetration time.
This can happen if too much dye is applied or if the wood is very dense. Try applying a lighter coat or consider a different shade that offers better contrast. Ensure you are using the dye on bare wood.
Drying times can be affected by humidity and temperature. Ensure the area is well-ventilated and at room temperature. Thicker coats may also take longer to dry.
Always test the dye on a scrap piece of the same wood or an inconspicuous area first. Wood type and porosity significantly affect the final colour. Mix shades in a separate container to achieve consistent custom colours.
Setup: Ensure the wood surface is bare, clean, dry, and free from dust, grease, or old finishes. Sand lightly if necessary. Stir the dye thoroughly before use. Apply using a brush or foam applicator in thin, even coats. For mixing colours, combine desired shades in a separate container.
Compatibility: Liberon Palette Wood Dye is designed for use on interior bare wood prior to applying oil, wax, varnish, and French polish finishes. It is suitable for both softwoods and hardwoods.
Care: Clean application tools immediately after use with water. Store the dye in a cool, dry place, away from direct sunlight and frost.
