Liberon Palette Wood Dye - Ebony

No, the dye is specifically for coloring interior bare wood. Painted surfaces must be stripped back to bare wood before application.

The minimum drying time between coats is 2 hours. Ensure the surface is completely dry before applying a top coat.

Yes, the wood shades can be mixed together to create unique custom colours.

You can apply oil, wax, varnish, and French polish finishes over the dyed wood.

Clean your brushes and applicators with water immediately after use.

The coverage is approximately 8-16m² per litre.

No, Liberon Palette Wood Dye is designed for interior use only.

Ensure the wood surface is uniformly prepared and free from contaminants. Apply the dye in thin, even coats, allowing adequate drying time between coats. Avoid over-application in one go.

Apply additional thin coats of the dye. Allow each coat to dry completely before applying the next. Consider mixing shades for a richer tone if desired.

Ensure you are applying the dye thinly. If excessive dye has been applied, it may obscure the grain. For future applications, focus on thin, even coats and test on a spare piece of wood first.

Verify that the dye is completely dry before applying the top coat. Ensure the surface was properly cleaned and prepared before dye application, and that the subsequent finish is compatible with dyed wood.