Best current price£30.00from Homebase
Shopping.co.uk recommended and popular offers
Homebase£30.00Visit shop Liberon Superior Light Silver Decking Stain 2.5L
Visit shop
B&Q£33.53Visit shop B&Q - 126120 Superior Decking Stain Light Silver 2.5 Litre Lib126120
Visit shop9 offers from £30.00 - £55.20
View price history by clicking the chart icon.
For homeowners seeking to enhance and protect their wooden decking, Liberon Superior Light Silver Decking Stain offers a premium solution. Its key benefit is providing robust protection against water, UV rays, and slips, while simultaneously improving aesthetics. A potential caveat is the necessary preparation of the decking surface before application.
| Colour | Silver |
|---|---|
| Model Part Number | 126120 |
| Brand | Liberon |
Coverage can vary based on wood porosity and application method, but typically 2.5L covers approximately 15-20 square meters for one coat. Always refer to the product label for specific coverage details.
This product is specifically formulated for exterior decking. For interior wooden floors, a different Liberon product designed for indoor use would be more appropriate.
Drying times can vary based on temperature and humidity. Generally, it is touch-dry within a few hours, but recoating should ideally be done after 12-24 hours. Check the product packaging for precise drying times.
The 'Silver' colour provides a semi-transparent finish that enhances the natural grain of the wood while imparting a silver hue.
Reapplication frequency depends on the level of foot traffic, weather exposure, and maintenance. Typically, reapplication is recommended every 1-3 years to maintain optimal protection and appearance.
No, it is essential to remove all previous finishes completely before applying Liberon Superior Decking Stain for proper adhesion and performance.
Once fully dry and cured, the stain is safe for use. However, keep pets and children away from the treated area during application and drying.
Ensure stain is thoroughly mixed before and during application. Apply thin, even coats and avoid over-application in one area. Ensure proper surface preparation.
Check environmental conditions; avoid application in very cold, damp, or humid weather. Ensure the surface was clean and dry before application. Verify that adequate time has passed between coats.
The surface may not have been properly prepared or cleaned before application. Previous finishes might not have been fully removed. Ensure the wood was dry during application.
This may indicate insufficient coats or that the stain has reached the end of its protective lifecycle and requires reapplication.
Preparation is crucial for optimal results. Ensure the deck surface is completely clean, dry, and free from any existing finishes, dirt, or dust. For new wood, a light sanding is recommended. For old wood, ensure it is thoroughly cleaned. Apply the stain evenly using a brush or roller. Allow adequate drying time between coats as per manufacturer instructions. This product is designed for use on wooden decking. For care, clean the deck periodically with water and a mild detergent. Avoid harsh chemical cleaners that could strip the stain. Reapplication may be necessary every 1-3 years depending on exposure and wear.
