Best current price£20.83from eBay
Shopping.co.uk recommended and popular offers
eBay£20.83Visit shop LIBERON SUPERIOR DECKING STAIN TEAK 2.5L
Visit shop
B&Q£33.53Visit shop B&Q - 126119 Superior Decking Stain Clear 2.5 Litre Lib126119
Visit shop10 offers from £20.83 - £46.74
View price history by clicking the chart icon.
This guide is for homeowners looking to enhance and protect their wooden decking. The Liberon Superior Clear Decking Stain offers a high-performance, eco-friendly solution that revitalizes your deck's appearance while providing robust protection against the elements and slips. A minor consideration is the need for thorough surface preparation to ensure optimal adhesion and longevity.
| Colour | Brown |
|---|---|
| Model Part Number | 126119 |
| Brand | Liberon |
Ensure the deck is clean, dry, and free from any old finishes, dirt, or debris. Lightly sand new wood, and remove old finishes from existing decks. Sweep away all dust.
Generally, two thin, even coats are recommended for optimal protection and finish. Allow adequate drying time between coats.
It is best to remove any old finishes completely before applying this stain to ensure proper adhesion and performance. Sanding or stripping may be required.
The stain features a biosourced formula based on vegetable oils and modified bio-based resins, which helps to reduce its environmental impact.
The anti-slip properties are integrated into the finish. Regular cleaning and maintenance will help preserve its effectiveness. Heavy wear may diminish the effect over time.
Drying times can vary based on temperature and humidity, but typically allow for several hours between coats. Always refer to the product's specific instructions for precise timings.
Ensure the surface was properly prepared and that the stain was applied evenly. Avoid over-application in one area. Stir the product thoroughly before and during use.
Check environmental conditions; avoid application in very high humidity or cold temperatures. Ensure previous coats or cleaning solutions were fully dry before application.
This may indicate that the stain has not fully cured or that the wood has become saturated. Allow more curing time or consider a second application if necessary, ensuring proper drying between coats.
Preparation: Before application, ensure the decking surface is clean, dry, and completely free from dust, dirt, and any previous finishes. For new wood, a light sanding is recommended. For older wood, ensure all previous coatings are removed and the surface is clean.
Application: Apply the stain evenly using a brush or applicator pad. Avoid applying in direct sunlight or when the temperature is below 10°C or above 25°C. For best results, apply two thin, even coats, allowing adequate drying time between each coat as per the product instructions.
Compatibility: This decking stain is suitable for use on most types of wooden decking.
Care: Clean the deck surface periodically with a soft brush and water. For stubborn dirt, use a mild detergent solution and rinse thoroughly. Avoid using abrasive cleaners or high-pressure washers, as these can damage the protective coating.
