Shopping.co.uk

Fiddes Nitro Floor Stain - 1 Litre - Medium Oak

Fiddes Nitro Floor Stain - 1 Litre - Medium Oak

Fiddes Nitro Floor Stain is a range of penetrating oil-based stains, specifically formulated for a...

Best current price£34.91from B&Q

Colour
BlackBrown

Best offers

Shopping.co.uk recommended and popular offers

All Offers

7 offers from £34.91 - £108.97

View price history by clicking the chart icon.

B&QB&Q - FiddesNitro Floor Stain1 LitreKenilworth Oak
Free delivery in 1–3 days
£34.91
Visit shop

Product Information

Full details

The Fiddes Nitro Floor Stain is designed for wood flooring professionals and DIY enthusiasts seeking to achieve a rich, penetrating colour on their wooden floors before applying a protective finish like Hard Wax Oil. Its key benefit is providing a deep, uniform colour that enhances the natural beauty of wood. A potential caveat is the need for careful application to avoid unevenness, as excess stain must be removed promptly.

All features

ColourBrown
Model Part NumberNFSMO1
BrandFiddes

Extended Product Information

FAQs

Can I use Fiddes Nitro Floor Stain on furniture?

While primarily designed for wooden flooring, it can be used on other interior wood surfaces. Ensure proper preparation and consider compatibility with your intended top coat.

Do I need to sand between coats of the stain?

No, do not sand between coats of Fiddes Nitro Floor Stain. This can remove the applied colour. Allow each coat to dry before applying the next.

How much area does one litre cover?

One litre covers approximately 14 square meters, depending on the porosity of the wood and the application method.

What is the best way to apply the stain?

Apply using a clean, lint-free cotton cloth or sponge in the direction of the wood grain. Immediately remove any excess with a separate clean cloth.

How long does the stain take to dry?

The drying time is 6-8 hours at room temperature. Ensure good ventilation during drying.

What finish should I use over Fiddes Nitro Floor Stain?

Fiddes Nitro Floor Stain is recommended for use under Fiddes Hard Wax Oil. It is also compatible with other suitable wood finishes.

Can I mix different colours of Fiddes Nitro Floor Stain?

The product information does not specify whether colours can be mixed. It is best to test any custom colour mixing on a scrap piece of wood first.

Troubleshooting

Uneven colour or blotching

Ensure excess stain was thoroughly wiped off immediately after application. Try applying a thinner, more even coat next time, and always work in sections.

Stain not penetrating the wood

The wood surface may be sealed or too smooth. Ensure the wood is properly sanded to the recommended grit (180-220) and that all dust is removed. Avoid applying over existing finishes.

Slow drying time

Ensure the application area has adequate ventilation and is at a stable room temperature (ideally 15-25°C). Thick application or high humidity can slow drying.

Colour is too light

Apply an additional coat of Fiddes Nitro Floor Stain, allowing each coat to dry fully. Test the shade on a scrap piece before applying to the main floor.

Pros and Cons

Pros

  • Provides deep, rich colour to wooden floors.
  • Enhances the natural grain of the wood.
  • Suitable for use as a base for subsequent finishes.
  • Relatively fast drying time allows for quicker project turnaround.
  • Can achieve darker shades with additional coats.

Cons

  • Requires careful application to ensure even coverage.
  • Excess stain must be removed promptly to avoid blotching.
  • Proper wood preparation (sanding) is crucial for best results.
  • Oil-based formulation requires appropriate ventilation and cleanup materials.

Setup, Compatibility & Care

Preparation:

  1. Sand the wooden substrate in stages, starting with 120 grit sandpaper and progressing to 180-220 grit.
  2. Always sand in the direction of the wood grain.
  3. Ensure all sanding dust is completely removed before application.
  4. Test the stain on a small, inconspicuous area or scrap wood to confirm the desired colour.

Application:

  1. Stir the contents of the Fiddes Nitro Floor Stain thoroughly before use.
  2. Apply the stain using a clean, lint-free cotton cloth or sponge.
  3. Work the stain into the wood, following the direction of the grain wherever possible.
  4. Immediately wipe off any excess stain with a separate, clean absorbent cloth, again following the grain.
  5. For a uniform finish, ensure even wiping pressure across the entire surface.

Drying & Recoating:

  1. Allow the stain to dry for 6-8 hours at room temperature.
  2. Do not sand between coats.
  3. Apply additional coats if a deeper colour is desired, allowing each coat to dry.

Compatibility:

  • Recommended for use under Fiddes Hard Wax Oil.
  • Suitable for most wooden flooring applications.

Care:

  • Clean application tools immediately after use with appropriate solvents as recommended for oil-based products.
  • Store the product in a cool, dry place away from direct sunlight.

Price History

DatePrice
Visit shop