Fiddes Nitro Floor Stain - 1 Litre - Ebony
Best current price£34.91from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£34.91Visit shop B&Q - FiddesNitro Floor Stain1 LitreEbony
Visit shopB&Q£34.91Visit shop One Offer
1 offer from £34.91
View price history by clicking the chart icon.
Product Information
Full details
The Fiddes Nitro Floor Stain in Ebony is designed for wood flooring professionals and DIY enthusiasts seeking a deep, penetrating oil-based stain to enhance the natural beauty of wood. Its key benefit is providing a uniform, rich colour that is ideal for use under Fiddes Hard Wax Oil, ensuring a durable and attractive finish. A potential caveat is the need for thorough preparation and immediate removal of excess stain to achieve the best results.
All features
| Colour | Black |
|---|---|
| Model Part Number | NFSE1 |
| Brand | Fiddes |
Extended Product Information
FAQs
What is the best way to prepare my floor for Fiddes Nitro Floor Stain?
You should sand your wooden floor in stages, from a 120 grit sandpaper up to 180-220 grit. Ensure you remove all sanding dust thoroughly and always sand in the direction of the wood grain.
Can I use this stain on furniture?
This product is specifically formulated for wooden flooring. While it might be used on other wooden surfaces, its performance and suitability for non-flooring applications have not been tested.
How many coats of stain should I apply?
One coat is typically sufficient to establish the base colour. If you wish to achieve a deeper shade, you can apply additional coats after the previous one has dried.
What is the coverage rate of Fiddes Nitro Floor Stain?
The coverage is approximately 14 square meters per litre, but this can vary depending on the porosity of the wood and the application method used.
How long does the stain take to dry?
Fiddes Nitro Floor Stain typically dries in 6-8 hours at room temperature. Ensure good ventilation during the drying process.
Is this stain suitable for all wood types?
The stain is designed for wooden flooring. The final colour will vary depending on the natural colour and porosity of the wood species you are applying it to.
Do I need to sand between coats of stain?
No, you should not sand between coats of Fiddes Nitro Floor Stain.
Troubleshooting
Uneven colour or blotchiness
Ensure all excess stain was wiped off immediately after application. Re-sanding lightly might be necessary if the issue is severe, followed by careful reapplication.
Stain not penetrating evenly
Verify that the wood surface was properly prepared and free of any contaminants or old finishes. Ensure consistent application pressure.
Excessive drying time
Ensure the product was applied in a single, thin coat and that the ambient temperature is within the recommended range (room temperature). Poor ventilation can also slow drying.
Colour not as expected
Test the stain on a concealed area or scrap wood first. Wood type significantly affects the final colour. Additional coats can deepen the shade.
Pros and Cons
Pros
- Provides a rich, deep colour for wooden floors.
- Acts as an excellent base for Hard Wax Oil finishes.
- Easy to apply with a cloth or sponge.
- Allows for colour deepening with multiple coats.
- Relatively fast drying time aids project efficiency.
Cons
- Requires meticulous surface preparation, including fine sanding.
- Excess stain must be removed immediately to avoid blotchiness.
- Colour results can vary based on wood type and application method.
- Only one coat is recommended for the initial application before further coats for deepening.
Setup, Compatibility & Care
Preparation:
- Sand the wooden floor in stages, starting with a medium grit (120) and progressing to a medium/fine grade (180-220 grit).
- Ensure all sanding is done in the direction of the wood grain where possible.
- Thoroughly remove all dust and debris from sanding.
- Test the stain on a scrap piece of wood to confirm the desired colour.
Application:
- Stir the stain well before use.
- Apply the stain using a clean, lint-free cotton cloth or sponge.
- Apply evenly in the direction of the wood grain.
- Immediately wipe away any excess stain with a separate, clean, absorbent cloth, following the grain.
- For uniform colour, blend the stain across the entire surface with consistent pressure.
Drying:
- Allow 6-8 hours of drying time at room temperature.
- Do not sand between coats.
Coats:
- One coat provides the base colour. Additional coats will deepen the shade.
Compatibility:
- Specifically recommended for use on wooden flooring.
- Ideal for application under Fiddes Hard Wax Oil.