Best current price£12.69from Amazon
Shopping.co.uk recommended and popular offers
Amazon£12.69Visit shop Johnstone's Cream Exterior Wood And Metal Hardwearing Gloss, 750Ml
Visit shop
B&Q£15.81Visit shop B&Q - Exterior Hardwearing Gloss Paint Cream750Ml
Visit shop5 offers from £12.69 - £49.77
View price history by clicking the chart icon.
This Johnstone's Exterior Hardwearing Gloss Paint in Cream is designed for homeowners and DIY enthusiasts seeking a durable, water-resisting, high-gloss finish for exterior wood, metal, and plastic surfaces. Its key benefit is exceptional durability, outperforming conventional gloss systems by up to two years and resisting blistering, cracking, and peeling. A caveat is that for its optimum 6-year durability, it must be used with Johnstone's Weatherguard Exterior Undercoat.
| Colour | Cream |
|---|---|
| Model Part Number | 303934 |
| Brand | Johnstone's |
This paint is suitable for exterior wood, metal, and plastic surfaces.
It offers a finish that can last up to two years longer than conventional gloss systems. For optimum 6-year durability, it must be used with Johnstone's Weatherguard Exterior Undercoat.
An undercoat is not strictly required for basic application, but Johnstone's Weatherguard Exterior Undercoat is recommended for achieving the maximum 6-year durability.
The coverage is approximately 11 square meters per tin.
Clean brushes and equipment immediately after use with white spirit.
It is best to apply the paint in dry conditions, avoiding rain, frost, and very high humidity, as this can affect drying and finish.
Drying times can vary depending on temperature and humidity. Typically, it will be touch dry within a few hours, but recoating will take longer. Always check the product tin for specific drying instructions.
Ensure the surface was properly prepared, clean, and dry. Use a suitable primer if applying to bare or problematic surfaces. Ensure the correct undercoat was used for optimal performance.
Apply paint in thin, even coats. Avoid over-brushing. Ensure paint is stirred thoroughly. Check for environmental conditions like high humidity or low temperatures that might affect application.
This can indicate moisture ingress. Ensure the surface is fully dry before painting and that adequate preparation, including priming and undercoating, was performed. Check for any underlying issues with the substrate.
Stir the paint thoroughly. If still too thick, a very small amount of white spirit can be added as per manufacturer guidelines, but avoid over-thinning as this can affect durability and finish.
Preparation: Ensure surfaces are clean, dry, and free from dirt, grease, and flaking paint. Lightly sand glossy surfaces to improve adhesion. For bare wood, use a suitable exterior wood primer. For metal, use a rust-inhibiting primer if necessary. For maximum 6-year durability, apply Johnstone's Weatherguard Exterior Undercoat before the gloss.
Application: Stir the paint thoroughly before use. Apply with a good quality brush or roller. Apply in dry conditions, avoiding rain or frost. Two coats are recommended for best results.
Compatibility: Suitable for exterior wood, metal, and plastic. Not recommended for use on surfaces that will be immersed in water or subject to heavy abrasion.
Care: Clean brushes and equipment immediately after use with white spirit. Store paint in a cool, dry place, away from direct sunlight and frost. Ensure the lid is tightly sealed.
