Setup, Compatibility & Care
Preparation: Ensure all surfaces are clean, dry, and free from dust, grease, and loose material. For bare wood, apply a suitable primer. For metal, use a rust-inhibiting primer. For previously painted surfaces, lightly sand and clean.
Compatibility: This gloss paint is compatible with wood, metal, and prepared masonry. It is not recommended for use on plastics or flexible surfaces.
Application: Stir the paint thoroughly before use. Apply with a good quality brush or roller. Two coats are recommended for best results. Allow adequate drying time between coats. Avoid application in excessively damp or cold conditions.
Care: Clean application tools immediately after use with water. For maintaining the painted surface, gently clean with a mild detergent and water. Avoid abrasive cleaners or harsh scrubbing.