Shopping.co.uk

Fiddes Nitro Floor Stain - Walnut

Fiddes Nitro Floor Stain - Walnut

Fiddes Nitro Floor Stain is a range of penetrating oil-based stains, specifically formulated for a...

Best current price£34.91from B&Q

Colour
BlackBrown

Best offers

Shopping.co.uk recommended and popular offers

All Offers

7 offers from £34.91 - £108.97

View price history by clicking the chart icon.

B&QB&Q - FiddesNitro Floor Stain1 LitreKenilworth Oak
Free delivery in 1–3 days
£34.91
Visit shop

Product Information

Full details

The Fiddes Nitro Floor Stain in Walnut is a penetrating, oil-based wood stain designed for wooden floors, ideal for use as a base for Hard Wax Oil. It offers a rich, deep color and is suitable for DIY enthusiasts and professionals seeking to enhance the natural beauty of wood. A key caveat is the necessity for thorough preparation and immediate excess removal to ensure a uniform finish.

All features

ColourBrown
Model Part NumberNFSW1
BrandFiddes

Extended Product Information

FAQs

Can I use Fiddes Nitro Floor Stain on furniture?

While formulated for floors, it can be used on other wood surfaces. Ensure proper preparation and a suitable topcoat for the intended use.

How many coats of stain should I apply?

One coat is typically sufficient for a base color. Additional coats can be applied after drying to deepen the shade.

What is the coverage rate?

Coverage is approximately 14 square meters per liter, but this can vary depending on the wood's porosity and the application method.

How long does it take to dry?

The stain typically dries in 6-8 hours at room temperature. Ensure good ventilation for optimal drying.

Do I need to sand between coats of stain?

No, sanding between coats of Fiddes Nitro Floor Stain is not recommended.

What is the best way to clean application tools?

Clean tools with a suitable solvent immediately after use.

Is this product suitable for exterior wood?

Fiddes Nitro Floor Stain is designed for interior wooden flooring and is not recommended for exterior use.

Troubleshooting

Uneven color or blotchiness

Ensure the wood was properly sanded and dust-free. Remove excess stain immediately after application. Apply thin, even coats, blending carefully.

Stain not drying within the specified time

Check environmental conditions (temperature, humidity). Ensure adequate ventilation. Do not apply too thickly.

Color is lighter than expected

Apply additional coats after the previous coat has dried to deepen the color. Ensure the test patch accurately represented the final desired shade.

Application marks or streaks visible

Ensure consistent application pressure and direction. Wipe off excess stain thoroughly and immediately with a clean cloth.

Pros and Cons

Pros

  • Provides a deep, rich color to wooden floors.
  • Specifically formulated for optimal performance on floors.
  • Acts as an excellent base for Fiddes Hard Wax Oil.
  • Highlights the natural wood grain for an enhanced aesthetic.
  • Relatively easy to apply with a cloth or sponge.

Cons

  • Requires careful substrate preparation (sanding).
  • Immediate removal of excess stain is critical for uniformity.
  • Drying time of 6-8 hours between coats can extend project duration.
  • Color shade may vary based on wood type and application method.
  • Additional coats are needed to deepen color, requiring more time and product.

Setup, Compatibility & Care

Preparation:

  1. Sanding: Sand the wooden substrate in stages, starting with a medium grit (e.g., 120) and progressing to a medium/fine grade (180-220 grit). Always sand in the direction of the wood grain.
  2. Cleaning: Ensure all dust from sanding, blemishes, and glue residue are completely removed.
  3. Testing: Test the chosen Fiddes Wood Dye on a similar substrate to confirm the desired color and shade.

Application:

  1. Stir: Stir the contents thoroughly before use. Check the shade.
  2. Apply: Apply using a clean, lint-free cotton cloth or sponge, following the direction of the wood grain.
  3. Wipe Excess: Immediately remove any excess stain with a separate, clean absorbent cloth, again following the grain.
  4. Uniformity: To achieve a uniform color, wipe evenly and blend the stain across the entire surface, applying consistent pressure by hand.
  5. Drying: Allow to dry for 6-8 hours at room temperature. Do not sand between coats.
  6. Additional Coats: For a deeper color, apply additional coats after the previous one has dried.

Compatibility:

  • Recommended for use as a base coat under Fiddes Hard Wax Oil.

Care:

  • Clean application tools with a suitable solvent immediately after use.
  • Store in a cool, dry place away from direct sunlight.

Price History

DatePrice
Visit shop