Frogtape Delicate Surface Masking Tape - 36mm x 41.1m

Frogtape Delicate Surface Masking Tape is best suited for delicate surfaces such as freshly painted walls, primed plasterboards, and most wallpapers.

The tape is designed to remove cleanly from most surfaces for up to 60 days.

No, priming isn't necessarily required before applying the tape to primed surfaces, but the surface should be clean, dry, and free of loose particles for best results.

While the tape is UV resistant, it is primarily recommended for interior use.

Ensure the tape is firmly applied, especially along the edges. Also, the PaintBlock® Technology is designed to prevent paint bleed.

Store the tape in its original canister, in a cool, dry place away from direct sunlight.

Always test the tape on an inconspicuous area first. If damage occurs, stop use immediately and contact the manufacturer.

No, this tape is designed for single-use applications.

Ensure the tape is firmly pressed down along the edges. Consider using multiple layers or a slower application speed. If the problem persists, the surface might be too porous or the paint is incompatible with the tape. Try testing a small area with a different tape or paint.

Make sure the surface is clean and dry before applying the tape. If the surface is too cold, the adhesive may not adhere well. Allow the surface to warm up or test with a different tape.

Remove the tape slowly and at a 45-degree angle. If the paint is dry, use a hairdryer on a low setting to soften the adhesive before removing the tape. If necessary, use a plastic scraper to gently lift the edge.