DecoArt Metallic Lustre - Radiant Red

It works on wood, walls, canvas, paper, unglazed ceramics, metal, and most absorbent surfaces.

Apply with a soft cloth or sponge for even coverage. For detailed work, use a small brush.

It dries quickly, but allow sufficient time before handling or buffing. Drying time can vary depending on environmental conditions.

Clean up with soap and water immediately after use.

It depends on the surface. For absorbent surfaces, priming is not always necessary. However, for non-absorbent surfaces, priming may be beneficial for adhesion.

It is primarily intended for indoor use. Outdoor durability is limited, and the finish may be affected by the elements.

Store the container tightly sealed in a cool, dry place.

Yes, it is water-based and non-toxic.

Ensure an even application. Apply a thin layer and avoid over-saturating the surface. Buff thoroughly after drying.

Make sure you've buffed the surface with a clean, soft cloth after it has dried completely. The buffing process is key to achieving a brilliant shine.

Ensure the surface is properly prepared by cleaning and lightly sanding. Apply a primer if necessary, especially on non-absorbent surfaces.

Clean tools immediately after use with soap and water before the product dries.