Setup, Compatibility & Care
- Preparation: Identify the location for your fixture and mark the spot on the wall.
- Drilling: Using a 6mm drill bit, drill a hole into the wall at the marked location. The depth of the hole should be equal to or slightly deeper than the length of the plug.
- Insertion: Insert the Rawlplug UNO Red Plug into the drilled hole. Ensure the lip of the plug is flush with the wall surface.
- Installation: Align the item you are mounting with the hole and insert the appropriate screw through the item and into the plug.
- Tightening: Tighten the screw until the item is securely fastened to the wall. Do not overtighten.
Compatibility: The Rawlplug UNO Red Plugs are compatible with screws ranging from 3.5mm to 5.0mm. Always select a screw length appropriate for the thickness of the item being mounted.
Care: No specific maintenance is required. Ensure the plugs are seated correctly during installation to maximize their performance. Avoid using in extremely high-temperature environments.