Best current price£8.99from Amazon
Shopping.co.uk recommended and popular offers
Amazon£8.99Visit shop Soladirect Anthracite Grey (Ral 7016) Spray Paint, Universal, Multi-Purpose, Fast Dry For Diy, Hobby, Crafts, Art, Wood, Metal, Ceramics
Visit shop
B&Q£9.99Visit shop B&Q - 400 Ml Anthracite Grey (Ral 7016) Universal Gloss Enamel PaintFast Drying High ShineInterior & Exterior
Visit shop5 offers from £8.99 - £9.99
View price history by clicking the chart icon.
SolaDirect 400 mL Spray Paint in Grey is designed for DIY enthusiasts, hobbyists, and craft makers who require a high-gloss, professional-grade finish on diverse surfaces. Its fast-drying, multi-purpose formula offers exceptional color durability and surface uniformity, making it an excellent choice for indoor and outdoor projects alike. However, users should note that optimal results depend heavily on proper surface preparation and environmental conditions during application, as the high-gloss finish can highlight underlying surface imperfections if not properly sanded or cleaned beforehand.
| Colour | Grey |
|---|---|
| Brand | SolaDirect |
Yes, SolaDirect Spray Paint is formulated to adhere to a variety of plastics, provided the surface is clean and dry.
While it can adhere well directly, using a primer is highly recommended if you are painting porous surfaces like wood or gypsum for a smoother final finish.
It can be used indoors, but you must ensure excellent ventilation by opening windows or using fans to disperse the fumes.
While the paint is fast-drying to the touch, we recommend allowing 24 hours for the paint to cure completely for maximum durability.
Yes, it is designed for both interior and exterior use and offers good durability against outdoor elements.
Usually, two thin coats are sufficient to achieve full coverage and the desired high-gloss finish.
Remove the nozzle and soak it in a small amount of paint thinner, or replace it if the clog persists.
Apply thinner coats and ensure the distance between the can and the surface remains consistent throughout the spray path.
You are likely holding the can too close or spraying too much paint in one spot; reduce the flow or increase the distance from the target surface.
Before starting your project, ensure the surface is clean, dry, and free of dust, grease, or rust. Lightly sand non-porous surfaces to improve paint adhesion. Shake the spray can vigorously for at least one to two minutes after hearing the mixing ball rattle to ensure the pigments are properly suspended. Apply in a well-ventilated area, preferably away from direct sunlight and high wind. To prevent the nozzle from clogging, turn the can upside down after use and press the actuator for a few seconds until only propellant comes out, then wipe the nozzle clean.
