Setup, Compatibility & Care
To ensure a successful application, follow these guidelines:
- Preparation: Clean the surface thoroughly to remove any contaminants. If the surface is glossy, lightly sand it to improve mechanical adhesion.
- Priming: Depending on the material, apply a suitable primer to ensure the enamel adheres correctly.
- Application: Shake the can vigorously before use. Spray from a distance of approximately 20-30cm in a well-ventilated environment.
- Drying: Allow adequate drying time between coats.
- Maintenance: Keep the nozzle clear by turning the can upside down and spraying for a second after finishing your project to clear the internal valve.