Superfresco Easy Innocence Wallpaper - Floral - Blue

No, this is a 'paste-the-wall' wallpaper. You apply the wallpaper paste directly to the wall, not to the back of the paper. This method simplifies the hanging process compared to traditional 'paste-the-paper' options.

Measure the total width of your walls and the height. Divide the total width by the roll width (0.52m) to get the number of strips. Multiply the number of strips by your wall height (plus the 32cm design repeat waste per strip, roughly) to get the total length needed, then divide by the roll length (10m). It's always best to round up and purchase an extra roll, especially with an offset pattern.

This wallpaper is not specifically designed for high-humidity environments like bathrooms or kitchens. Prolonged exposure to moisture can cause peeling or damage. It's best suited for dry interior rooms such as living rooms, bedrooms, or hallways.

For general cleaning, gently dust the surface with a soft, dry cloth. For light marks, use a slightly damp, soft sponge or cloth, and pat dry immediately. Avoid abrasive cleaners or excessive moisture, which could damage the delicate surface.

You should use a high-quality 'paste-the-wall' or 'ready-mixed' wallpaper paste, specifically formulated for non-woven wallpapers. Follow the paste manufacturer's instructions for application.

Superfresco Easy wallpapers are generally designed for easier removal. When you decide to change your decor, this wallpaper typically peels off dry in full strips, leaving your walls smooth and ready for redecoration.

Ensure walls are smooth and paste is applied evenly and generously. Use a smoothing brush or roller to work bubbles out from the center to the edges immediately after hanging. Small bubbles may disappear as the paper dries.

This is often due to not correctly accounting for the offset design match and 32cm design repeat. Before cutting, lay strips side-by-side to ensure the pattern aligns. If already hung, carefully peel back and re-align immediately before the paste fully sets. Always use a plumb line for your first strip to ensure a straight start.

Ensure strips are butted tightly together and not overlapped. Apply enough paste to the edges. Ensure walls are primed correctly so that the paste adhesion is consistent across the wall. Good lighting during installation helps to spot and correct this early.

Always measure your wall area carefully and factor in the 32cm design repeat when calculating rolls needed. It's always recommended to purchase at least one extra roll, especially for patterned wallpaper, to account for waste and potential mistakes. Keep a record of the batch number for future matching if you need to buy more.

Check that the wall surface is clean, dry, and properly prepared (e.g., no loose paint, no excessive dust). Ensure you are using a good quality 'paste-the-wall' wallpaper paste suitable for non-woven papers and that it's applied generously and evenly to the wall.