Bosch EXPERT Multi Material Power Change Plus Hole Saw - 32 x 60mm

The Bosch Carbide Technology provides exceptional durability, allowing the hole saw to last up to 50 times longer than standard Bosch hole saws, especially when cutting tough materials.

Yes, this hole saw is designed to be used with the Bosch Power Change Plus keyless arbor for optimal safety, speed, and accuracy.

It is designed for multi-material cutting, making it suitable for a wide range of tough materials commonly encountered in construction and renovation.

The hole saw can cut neat holes up to 60 mm in depth.

Simply align the hole saw's mounting slots with the arbor, push it on, and twist until it locks. The keyless system provides a secure, tool-free connection.

After use, remove the saw from the arbor, brush off debris from the teeth and mounting area, and store it in a protective case. Avoid damp storage conditions.

While designed for tougher materials, it can be used on plasterboard. However, for plasterboard-only applications, standard hole saws might offer a more cost-effective solution.

Ensure both the hole saw and arbor are clean and free of debris. Check that you are using the correct Bosch Power Change Plus arbor and that the hole saw is aligned correctly with the arbor's locking mechanism before twisting.

Verify that your drill has sufficient power and torque. Ensure the correct speed setting is used for the material being cut. Check that the material is properly secured and that you are applying steady, even pressure. Clear swarf frequently.

Make sure the hole saw is securely locked onto the arbor. Check that the arbor is properly mounted in the drill chuck. Ensure the material being cut is stable and not moving.

Avoid forcing the saw through the material. Maintain a consistent cutting speed and apply moderate pressure. Ensure you are using the correct saw for the material type. Keep the teeth clean and free from resin or debris build-up.