Bosch Professional Multi Material Hole Saw - 32 mm

This hole saw is highly versatile and can cut softwood, drywall, plastics, metal pipes, non-ferrous metals (like aluminum and copper), and stainless steel.

No, the Bosch Professional Multi Material Hole Saw typically does not include an arbor. You will need a standard hole saw arbor that fits your drill.

This hole saw has a maximum cutting depth of 44 mm, allowing it to handle various common construction materials effectively.

The new slot design makes plug removal significantly easier and quicker. You can simply insert a tool into the slots to pry out the cut material, improving your overall work efficiency.

To extend its life, use appropriate cutting speeds for the material, apply cutting fluid when cutting metals, avoid excessive pressure, and keep the saw clean and stored properly in a dry environment.

Yes, you can use this hole saw with most cordless drills, provided the drill has sufficient power for the material being cut and accepts a standard hole saw arbor.

Ensure you are using the correct RPM for the material (slower for metals, faster for wood/plastic). Apply consistent, moderate pressure. For metal, use cutting fluid to reduce friction and heat buildup.

Utilize the new slot design by inserting a screwdriver or pry tool into the slots to easily leverage and remove the plug. This design is specifically for efficient plug extraction.

Check that the hole saw is securely threaded onto the arbor and the arbor is firmly clamped in the drill chuck. Ensure the pilot bit is sharp and properly positioned. If teeth appear dull or damaged, the hole saw may need replacement.