TP-Link JetStream TL-SL2428P - 24-Port PoE Switch

The total PoE power budget is 180W.

You can access the interface by entering the switch's IP address in a web browser on a computer connected to the same network.

There is a reset button on the switch. Press and hold this button for a few seconds.

Yes, the switch supports VLANs to segment your network.

You can connect any device that supports the IEEE 802.3af/at PoE standard, such as IP cameras, wireless access points, and IP phones.

Please refer to the documentation or the retailer you purchased from for warranty details.

Yes, you can upgrade the firmware through the web-based management interface by downloading the latest version from the TP-Link website.

Check the power budget and ensure the total power consumption of all connected devices does not exceed 180W. Verify the Ethernet cable connections and make sure they meet the correct specifications. Confirm that PoE is enabled on the corresponding port via the web interface.

Check cable connections for damage. Check the speed settings on the switch ports and connected devices. Ensure QoS is configured correctly to prioritize critical traffic. Check for broadcast storms or network loops.

Verify the switch's IP address. Ensure your computer is on the same network as the switch. Check the network connection and try a different web browser. Reset the switch to factory settings if necessary.

Check VLAN configuration settings (port assignments and VLAN IDs) and ensure that the VLANs are correctly configured on the switch and any connected devices or other switches in the network.