APC UPS Network Management Card - Red
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The APC AP9640 Smart-UPS Network Management Card (Gen3) is designed for IT professionals and system administrators who need to manage their UPS infrastructure remotely over a network. It provides crucial visibility and control, allowing for secure monitoring and automated shutdown procedures during power failures, though it requires a SmartSlot-equipped UPS and specific software licensing for advanced virtual infrastructure support.
All features
| Colour | Red |
|---|---|
| Model Part Number | W128815271 |
| Brand | DELL |
Extended Product Information
FAQs
Does this card fit all APC UPS models?
No, it is specifically designed for APC Smart-UPS models that feature a SmartSlot host interface.
Can I manage multiple UPS units at once?
Yes, using EcoStruxure IT software, you can aggregate data and manage multiple networked UPS devices from a single console.
Is an additional license required for basic monitoring?
Basic monitoring and web-based management are included with the card; however, specific virtual infrastructure support requires a dedicated PowerChute license.
What is the primary benefit of the Gen3 processor?
The Gen3 processor supports faster 1Gbps network speeds and offers significantly larger storage for event and data logs compared to previous generations.
How do I update the firmware?
Firmware updates can be performed directly through the web interface or via the CLI by uploading the latest firmware file provided by APC/Schneider Electric.
What happens if my network goes down during a power outage?
The card is designed to hold the last valid instruction set, and the UPS will continue to protect the load locally based on its internal threshold settings.
Troubleshooting
Cannot access the web interface.
Verify that the Ethernet cable is connected and the card has a valid IP address. Use the micro-USB console port to check current network settings.
UPS not detected by the network card.
Ensure the card is firmly seated in the SmartSlot and the UPS is powered on. Restart the UPS if the card remains unrecognized.
PowerChute software cannot trigger a shutdown.
Check the authentication credentials between the Network Management Card and the PowerChute software and ensure network firewall rules permit communication on necessary ports.
Pros and Cons
Pros
- Supports high-speed 1Gbps network connections
- Comprehensive remote power-cycling capabilities
- Automated shutdown for virtual and physical servers
- Easy-to-use web browser interface
- Extensive event and data logging capacity
Cons
- Requires specific SmartSlot-equipped UPS hardware
- Additional licenses needed for advanced HCI and virtual machine support
- Not compatible with UPS models lacking a SmartSlot
- Initial configuration requires basic network knowledge
Setup, Compatibility & Care
To install the card, power down the UPS, locate the SmartSlot on the rear panel, remove the protective cover, and slide the card into the slot until it is firmly seated. Once powered on, connect an Ethernet cable to the card's port. Access the web interface using the default IP address—configured via the micro-USB console port—to set a static IP for your network. For optimal care, keep the firmware updated through the management console to ensure the latest security patches are applied. Ensure the environment is free of excessive dust and moisture to prevent hardware degradation.