Gyproc Thermaline Basic Plasterboard - 2400mm x 1200mm x 22mm

While it provides thermal benefits, ensure proper ventilation and moisture-resistant measures are taken if installing in high-humidity areas.

This board does not contain a built-in vapor control layer; consider using a vapor-check variant if your building project specifies one.

Use a sharp utility knife to score the paper face and snap the board; the polystyrene backing can be cut with a fine-toothed hand saw or a dedicated foam cutter.

Yes, provided the correct self-drilling screws for insulated plasterboard are used.

The polystyrene meets building regulation standards for fire performance, but like all insulation materials, it should be covered properly with plasterboard face and finish.

Ensure mechanical fixings are used alongside adhesive if the wall surface was uneven or dusty.

Verify that high-quality joint tape was used and that the temperature in the room was stable during the drying process.

Use long, specialized fixings that penetrate through the insulation layer into the solid masonry or timber stud behind.