Johnstone's Shed & Fence - Red Cedar - 5L

Clean the wood surface thoroughly to remove dirt, mildew, and loose paint. Sand the surface lightly to improve adhesion if necessary. Ensure the surface is completely dry before application.

Two coats are generally recommended for optimal protection and color. Allow the first coat to dry completely before applying the second.

Yes, Johnstone's Shed & Fence can be applied by spraying. Ensure you follow the manufacturer's instructions for the specific sprayer and application method.

Drying times vary depending on weather conditions. Refer to the product label for specific drying times. Generally, it dries to touch in a few hours, but allow sufficient time for full curing before exposure to the elements.

Clean brushes, rollers, and spray equipment with water immediately after use.

Johnstone's Shed & Fence is available in various colors. Refer to the product packaging or your retailer for available color options.

Avoid applying over existing coatings unless they are fully compatible. Always test in an inconspicuous area first.

Store in a cool, dry place, and keep the container tightly sealed when not in use.

Ensure proper surface preparation before application. Remove any loose paint or debris and ensure the wood is completely dry. Apply the product in thin, even coats, and avoid over-application.

Stir the product thoroughly before and during application. Apply an even coat, and avoid applying too much product in one area. Consider applying a second coat to even out the color.

Ensure adequate ventilation during application and drying. Check the product's expiry date and storage conditions. Avoid application in damp or humid conditions.