Eureka N6 plus Robotic Vacuum Cleaner - Black

The Eureka NERN6plusBK has a charging time of approximately 6 hours.

The docking station has a large dust capacity of 2 liters, meaning you won't need to empty it frequently.

Yes, it supports multiple floor types, including carpets. It also features carpet detection to automatically adjust suction power.

No, a physical remote control is not included. You can operate and schedule the robot via the Eureka App or compatible voice assistants.

It is recommended to clean the EPA filter regularly, typically weekly, and replace it every 2-3 months depending on usage and environment, as per the user manual instructions.

The robot provides a runtime of up to 100 minutes on a single charge.

Yes, the Eureka NERN6plusBK is equipped with a wet mopping function to clean hard floors.

Ensure the docking station is properly plugged in and receiving power. Check that the robot's charging contacts are clean and making good contact with the station. Verify that the robot is correctly aligned on the charging base.

Ensure the area is clear of small obstacles, loose cables, or rugs with long fringes. Clean the LDS sensor and infrared obstacle avoidance sensors. Check if the floor surface is too uneven or if there are sudden drops the robot cannot detect.

Check if the dustbin is full and needs emptying. Clean or replace the EPA filter. Inspect the main brush and any inlets for blockages from hair or debris.

Ensure your Wi-Fi network is functioning correctly. Restart your router and the robot vacuum. Make sure the robot is within range of your Wi-Fi signal. Check the Eureka App for any network-related troubleshooting steps.

Ensure the water tank is filled correctly. Check that the mopping pad is properly attached and clean. Verify that the water flow settings in the app are adjusted appropriately.