Forgefix Through Bolt - M8 x 95mm - Yellow

You need an 8mm drill bit for the Forgefix Through Bolt M8 x 95mm.

The minimum hole depth is 40mm.

The maximum thickness of the material is 55mm.

Zinc Yellow Passivation is a surface treatment that provides a corrosion-resistant coating with a yellow appearance.

Yes, the Zinc Yellow Passivated finish provides good corrosion resistance, making them suitable for outdoor use.

You will need an 8mm drill bit, a drill, and the correct socket drive or spanner.

It is generally not recommended to reuse through bolts, as their expansion mechanism may be compromised upon removal.

Ensure the drilled hole is the correct size (8mm) and depth (minimum 40mm). Check the threads of the bolt and the item being fixed for any damage. Use the correct socket or spanner size and tighten the bolt firmly but avoid over-tightening.

Check that the bolt is fully expanded within the material. Ensure the hole was drilled to the correct specifications. The item being fixed may have shifted or the material may have weakened over time; re-tighten the bolt or replace if necessary.

If the corrosion is minor, clean the bolt and apply a corrosion-resistant sealant. For severe corrosion, replace the bolt with a new one.