Best current price£32.00from Elesi.com
Shopping.co.uk recommended and popular offers
Elesi.com£32.00Visit shop Lieber Black/White Brushed Copper 3 Gang 2 -Way Intelligent Dimmer 100W Led (250W Halogen/Incandescent) - Size: 146Mm X 86Mm X 2.95 Mm
Visit shop1 offer from £32.00
View price history by clicking the chart icon.
This LIEBER Intelligent Dimmer Switch in white is designed for homeowners looking to enhance their interior lighting control with a modern, stylish solution. Its key benefit is providing versatile dimming for LED bulbs and complementing contemporary decor. A caveat to be aware of is that only dimmable LED bulbs are compatible. The switch features a 3-gang, 2-way configuration with a brushed finish for a sleek look and reduced fingerprints, offering a quality upgrade at a competitive price.
| Colour | White |
|---|---|
| Model Part Number | SS-LL-40-LTS203-CBPW |
| Brand | LIEBER |
No, this intelligent trailing edge dimmer is designed exclusively for dimmable LED bulbs. Using non-dimmable bulbs will result in poor performance, flickering, or the bulbs may not light up at all.
For LED bulbs, the maximum recommended load is 100W per gang. For traditional halogen bulbs, it can handle up to 250W per gang.
While designed for 2-way switching, it can technically be used in a 1-way circuit by wiring it appropriately, but its full functionality is realized in a 2-way setup.
Trailing edge dimmers are a more modern technology that works by cutting off the 'tail' of the AC waveform. They are generally quieter and more compatible with a wider range of LED and CFL loads than older 'leading edge' dimmers.
Use a soft, slightly damp cloth to wipe the surface. Avoid harsh chemicals or abrasive materials that could scratch or damage the finish.
The dimensions are approximately 146mm x 86mm x 2.95mm.
Yes, a Brushed Copper variant (MPN: SS-LL-40-LTS203-CBPB) is also available.
Ensure you are using dimmable LED bulbs specifically compatible with trailing edge dimmers. Check that the bulb wattage is within the dimmer's supported range.
Verify that the power supply is connected correctly and that the circuit breaker is on. Consult an electrician to check wiring connections.
Check the wiring for the specific gang that is not working. If the issue persists, there may be an internal fault with the switch; contact customer support or an electrician.
Some LED bulbs may produce a slight buzzing sound when dimmed. Ensure the bulbs are of good quality and designed for dimming. If the noise is excessive, try a different brand of dimmable LED.
Setup:
Installation of the LIEBER Intelligent Dimmer Switch should be performed by a qualified electrician. Ensure the power supply to the circuit is turned off at the main breaker before commencing any work. Follow standard wiring practices for 3-gang, 2-way switching configurations.
Compatibility:
This dimmer is designed for use with dimmable LED bulbs only. It is a trailing edge dimmer, so it is compatible with most LED bulbs that are specifically marked as dimmable and suitable for trailing edge dimmers. It also supports up to 250W Halogen equivalent load per gang.
Care:
To clean the dimmer switch, use a soft, damp cloth. Avoid using abrasive cleaners or solvents, as these can damage the brushed finish. Ensure the cloth is only slightly damp to prevent moisture from entering the electrical components.
