Lieber 3 Gang 2 -Way Intelligent Dimmer - Copper
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This Lieber 3 Gang 2-Way Intelligent Trailing Dimmer in Brushed Copper is designed for homeowners looking to add a stylish and functional lighting control to their living spaces. Its key benefit is providing versatile dimming for up to three separate lighting circuits, compatible with modern dimmable LED bulbs. A key consideration is that only dimmable LED bulbs will work correctly with this dimmer.
All features
| Colour | Copper |
|---|---|
| Model Part Number | SS-LL-40-LTS203-CBPB |
| Brand | LIEBER |
Extended Product Information
FAQs
What type of bulbs can I use with this dimmer?
This dimmer is designed for dimmable LED bulbs (trailing edge compatible) and traditional halogen bulbs. Non-dimmable LED bulbs will not work.
Do I need a special electrician to install this?
Yes, installation involves mains electrical wiring and should only be performed by a qualified electrician for safety and compliance.
What does '2-Way' switching mean?
2-Way switching means you can control a light fixture from two different locations, for example, at the top and bottom of a staircase.
How do I clean the brushed copper finish?
Use a soft, dry or slightly damp cloth. Avoid harsh chemicals or abrasive materials that could damage the finish.
Can I use this dimmer with standard (non-dimmable) LED bulbs?
No, you must only use LED bulbs that are explicitly stated as 'dimmable' and compatible with trailing edge dimmers. Standard LEDs will not function correctly.
What is the maximum load this dimmer can handle?
The dimmer is rated for a maximum load equivalent to 100W for LED bulbs or 250W for halogen bulbs.
Troubleshooting
Lights flicker or buzz when dimmed.
Ensure you are using dimmable LED bulbs specifically rated for trailing edge dimmers. If issues persist, try a different brand or type of compatible dimmable LED bulb.
One or more gangs do not control the lights.
Check wiring connections to ensure they are secure and correct for a 2-way setup. Verify that the bulbs connected are compatible and functioning correctly on a standard switch.
Dimmer switch feels warm during operation.
Some warmth is normal, especially under heavy load. However, if it becomes excessively hot, ensure the total wattage of the connected lights does not exceed the dimmer's rating (100W LED / 250W Halogen equivalent) and that there is adequate ventilation.
Dimmer does not respond to touch/operation.
Verify that the circuit breaker for the relevant lighting circuit is on and has not tripped. Check all wiring connections, assuming the power has been safely isolated first.
Pros and Cons
Pros
- Modern and stylish brushed copper finish.
- Controls three independent lighting circuits.
- Supports 2-way switching for flexible control.
- Optimized for dimmable LED bulbs.
- Reduces glare and smudges for a cleaner look.
Cons
- Requires specifically dimmable LED bulbs; standard LEDs will not work.
- Compatibility is limited to trailing edge dimmable bulbs.
- Installation requires basic electrical knowledge or a qualified electrician.
Setup, Compatibility & Care
Setup: This dimmer requires installation by a qualified electrician, as it involves mains electrical wiring. Ensure power is isolated before commencing any work.
Compatibility: This dimmer is designed for use with dimmable LED bulbs (trailing edge compatible). It is also compatible with traditional halogen bulbs up to 250W. Crucially, non-dimmable LED bulbs will not function correctly and may cause damage. Always verify that your chosen LED bulbs are explicitly marked as dimmable and trailing edge compatible.
Care: Clean the brushed copper finish with a soft, dry or slightly damp cloth. Avoid abrasive cleaners or solvents, which can damage the finish. Regular dusting will help maintain its appearance.