Single Sleeper Corner Support Spike - 440mm - Grey

The support spike is 440mm in length.

The spike is made of heavy-duty, 2mm thick pre-galvanised material.

The support spike has a pre-galvanised finish.

The key benefits are easy installation, suitability for all sleeper sizes, and a long-lasting landscaping solution.

Yes, they are suitable for use in timber sleeper planters, pathway edging, and retaining walls.

The spikes are designed with an extra shear angle and notches for extra grip.

You may need a hammer or rubber mallet, and potentially a drill for pre-drilling pilot holes in hard ground.

Regularly check for any movement or loosening of the sleepers, especially after heavy rain or ground movement, and re-secure if necessary.

Pre-drill pilot holes in the ground, especially in hard or compacted soil. Use a rubber mallet to avoid damaging the spike head.

Ensure the spike is driven in at a slight angle and that it has sufficient depth. Check the ground conditions for any unusual instability and adjust the installation as needed.