Single Sleeper Corner Support Spike 440mm - Brown

Insert the spike to the point where it is flush with or slightly below the surface of the sleeper. This ensures a secure hold.

Yes, these spikes are compatible with both treated and untreated sleepers.

A mallet is the primary tool needed. A level may be helpful to ensure alignment.

Yes, if removed carefully, the spikes can be reused, although some ground contact damage may occur.

Use a level to check the sleepers during and after the installation of the spikes. Adjust the ground or packing if necessary.

Yes, but ensure the ground is stable and compacted. Consider extra support if the slope is significant.

The lifespan depends on the ground conditions and weather exposure. However, with proper installation and care, they should last for many years.

Pre-drill a pilot hole in hard ground to ease insertion. Use a mallet for controlled driving.

Ensure the spikes are driven deep enough into the ground. Check and adjust ground compaction if necessary. Consider using additional support, especially in loose soil.

Make sure you are hitting the spike directly with the mallet and that the ground is reasonably clear of rocks or other hard obstructions. If the ground is very hard, pre-drill a small pilot hole.