Osmo Garden Stain - Pearl Grey
Best current price£7.57from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£7.57Visit shop B&Q - Garden Stain SatinBasalt GreySample 5Ml
Visit shopB&Q£7.57Visit shop All Offers
3 offers from £7.57 - £69.71
View price history by clicking the chart icon.
B&Q - Garden Stain SatinPearl GreySample 5MlFree delivery in 1–3 days£7.57Visit shop →
B&Q - Garden Stain SatinPearl Grey2.5LFree delivery in 1–3 days£69.71Visit shop →
Product Information
Full details
This guide is for homeowners and DIY enthusiasts looking to protect and beautify exterior wood surfaces. The Osmo Garden Stain Satin offers a durable, weather-resistant, and UV-stable finish that enhances the natural look of wood while providing excellent protection. A key consideration is the recommendation for a specific base coat on certain wood types to ensure optimal performance.
All features
| Colour | Grey |
|---|---|
| Model Part Number | 7247-7255 |
| Brand | Osmo |
Extended Product Information
FAQs
How many coats of Osmo Garden Stain Satin are required?
Two thin coats are recommended for optimal protection and a uniform finish.
Do I need to sand before re-applying the stain?
No, sanding is not necessary when topping up the coating. Simply clean the surface and apply a fresh coat.
Is this product safe for use on children's toys?
Yes, once dry, the finish is safe for humans, animals, and plants, and it is suitable for children's toys as per EN 71.3 standards.
What is the drying time for Osmo Garden Stain Satin?
Under normal climatic conditions (23 °C / 50% relative humidity), the drying time is approximately 3-4 hours.
Do I need a base coat?
Yes, Osmo WR Base Coat 4001 is recommended before use for specific wood species: Pine, Spruce, Accoya, and Kebony.
Can this stain be sprayed?
Yes, the product is sprayable, offering optional application methods.
What kind of maintenance does it require?
Regular cleaning is recommended. For re-application, a simple clean and one new coat is sufficient, no sanding needed.
Troubleshooting
Uneven color or finish after application
Ensure the product was stirred thoroughly before and during application. Apply coats thinly and evenly, avoiding over-application in any one area. Check for environmental factors like wind or direct sunlight during application.
Product not drying properly
Verify that the wood surface was clean and dry before application. Ensure adequate ventilation and appropriate temperature/humidity levels. Too thick an application can also impede drying.
Wood appears darker than expected
This is normal for transparent stains, as they enhance the natural wood color. The final color depends heavily on the wood species and its natural pigment. Always test on a small area first.
Peeling or flaking after some time
This can occur if the surface was not properly prepared or if moisture penetrated the wood due to insufficient coats or damage to the finish. Ensure two coats were applied and that the surface was clean and dry prior to application.
Pros and Cons
Pros
- Provides excellent protection against weather and UV damage.
- Water-based formula is low in VOCs and easier to clean up.
- Durable, microporous finish prevents cracking and peeling.
- Simplifies maintenance with no sanding required for future coats.
- Safe for use around children, pets, and plants after drying.
- Available in a satin finish that enhances wood's natural appearance.
Cons
- Requires a specific Osmo WR Base Coat for certain wood types (Pine, Spruce, Accoya, Kebony).
- Two coats are always recommended for full protection and coverage.
- Drying time is dependent on climatic conditions.
- Transparent color means wood grain will remain visible, which may not suit all aesthetic preferences.
Setup, Compatibility & Care
Setup:
- Ensure the wood surface is clean, dry, and free from dust, dirt, and grease.
- For certain wood types (Pine, Spruce, Accoya, Kebony), apply one coat of Osmo WR Base Coat 4001 first and allow it to dry.
- Stir the Osmo Garden Stain thoroughly before and during application.
- Apply the first coat thinly and evenly with a brush or by spraying.
- Allow the first coat to dry for approximately 3-4 hours under normal climatic conditions (23 °C / 50% relative humidity).
- Apply a second coat thinly and evenly.
Compatibility:
- Suitable for most exterior wood species.
- Always recommended to test on an inconspicuous area first, especially when applying over existing finishes.
- Use the recommended Osmo WR Base Coat 4001 for Pine, Spruce, Accoya, and Kebony woods.
Care:
- Clean tools and brushes immediately after use with Osmo Brush Cleaner (or similar solvent for oil-based stains, water for water-based).
- For maintenance re-coating, simply clean the surface and apply one fresh coat without sanding.
- Wipe away spills or dirt promptly to maintain the finish.
- Avoid heavy use of cleaning agents, which can degrade the finish.