Osmo Garden Stain Satin - Rosewood - Sample 5Ml
Best current price£7.57from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£7.57Visit shop B&Q - Garden Stain SatinRosewoodSample 5Ml
Visit shopB&Q£7.57Visit shop One Offer
1 offer from £7.57
View price history by clicking the chart icon.
Product Information
Full details
The Osmo Garden Stain is a water-based, transparent, satin wood coating designed for exterior use, offering extreme weather resistance and UV stability. It's ideal for homeowners looking to protect and enhance their garden wood structures like fences, pergolas, and decking. A key benefit is its microporous, penetrating finish that prevents cracking, peeling, or flaking, and requires no sanding for reapplication. However, a caveat is that certain wood types (Pine, Spruce, Accoya, Kebony) require a base coat for optimal performance.
All features
| Colour | Red |
|---|---|
| Model Part Number | 7247-7255 |
| Brand | Osmo |
Extended Product Information
FAQs
How many coats of Osmo Garden Stain are needed?
Two thin, even coats are always required to ensure full protection and the desired finish.
Do I need to sand the wood before applying the stain?
No, for the initial application, sanding is generally not required if the wood is clean and dry. Crucially, no sanding is necessary when topping up the coating in the future.
What is the drying time for Osmo Garden Stain?
The drying time is approximately 3-4 hours under normal climatic conditions (23°C / 50% relative humidity). This can vary depending on temperature, humidity, and ventilation.
Is Osmo Garden Stain safe for children's toys and garden furniture?
Yes, once dry, the finish is safe for humans, animals, and plants. It is also suitable for children's toys as it complies with EN 71.3 standards.
Which wood types require a base coat?
Osmo WR Base Coat 4001 is recommended before application for Pine, Spruce, Accoya, and Kebony wood species.
Can I spray Osmo Garden Stain?
Yes, the product is sprayable, offering an optional application method for convenience and speed.
How do I clean the tools after use?
Clean tools and equipment immediately after use with water or a suitable solvent.
Troubleshooting
Uneven colour application
Ensure the product was stirred thoroughly before and during application. Apply thin, even coats, avoiding over-application in one spot. Ensure the surface is properly prepared and dry.
Wood appears darker than expected
The final colour can vary depending on the wood species and its porosity. Test on an inconspicuous area first. Ensure only thin coats were applied; two thin coats are better than one thick coat.
Product not drying properly
Check environmental conditions; drying times are approximate and depend on temperature and humidity. Ensure adequate ventilation. If applied too thickly, drying will be significantly extended.
Coating peeling or flaking after some time
This is uncommon with Osmo Garden Stain due to its microporous nature. It may indicate improper application, insufficient drying time between coats, or inadequate surface preparation. For specific wood types (Pine, Spruce, Accoya, Kebony), ensure the WR Base Coat 4001 was used prior to the Garden Stain.
Pros and Cons
Pros
- Provides long-lasting protection against weathering and UV rays.
- The microporous finish prevents common wood coating failures like peeling and cracking.
- Safe for use in gardens and on items intended for children.
- Easy maintenance with no need for sanding before reapplication.
- Available in a range of transparent colours to enhance wood's natural appearance.
Cons
- Certain wood types require a specific base coat for best results.
- Drying time can be affected by humidity and temperature.
- Application by spraying is optional; brush application might be more common for DIY users.
- Coverage is calculated per coat, and two coats are always recommended.
Setup, Compatibility & Care Instructions
Setup:
- Ensure the wood surface is clean, dry, and free from dirt, grease, and old coatings.
- For Pine, Spruce, Accoya, and Kebony, apply Osmo WR Base Coat 4001 first and allow it to dry.
- Stir the Osmo Garden Stain thoroughly before and during application.
- Apply one thin, even coat of the Osmo Garden Stain using a brush or spray application.
- Allow approximately 3-4 hours for drying under normal climatic conditions (23°C / 50% relative humidity).
- Apply a second thin, even coat. Two coats are always required for full protection.
Compatibility:
- Suitable for all types of wood in the exterior environment.
- Compatible with Osmo WR Base Coat 4001 for specific wood species.
- Do not use on surfaces that will be in direct contact with drinking water.
Care:
- Topping up the coating requires no sanding; simply clean the surface and reapply a thin coat.
- Clean tools and equipment immediately after use with water or a suitable solvent.
- For general cleaning of the finished surface, use a damp cloth.