Smith and Rodger Flow and Bond - 1 L

It is an additive for water-based paints that improves adhesion, flow, and coverage.

It is designed for use with water-based paints, both interior and exterior.

Mix 1 part Flow and Bond with 10 parts paint and stir thoroughly.

No, Flow and Bond is designed to improve application without affecting the color.

It is suitable for use on a variety of surfaces. However, ensure the surface is clean, dry and primed if necessary before painting.

Store in a cool, dry place away from direct sunlight.

Clean brushes and equipment with soap and water immediately after use.

No, it is designed specifically for use with water-based paints.

Ensure the surface is properly prepared (clean, dry, and lightly sanded if necessary) and that the correct mixing ratio of Flow and Bond to paint was used.

Ensure that the paint is mixed well and apply thin, even coats. Consider using a higher-quality brush or roller.

Verify the mixing ratio and that the paint and surface are compatible. Multiple coats may still be required depending on the original surface color and type of paint used.