Rustins Plastic Coating and Hardener Gloss Finish 1 Litre Two Part Wood Lacquer. This two-part cle...Rustins Plastic Coating and Hardener Gloss Finish 1 Litre Two Part Wood Lacquer. This two-part clear cold cure lacquer is for use on wood, hardboard, cork, and plastic laminates. It offers extremely good adhesion and is resistant to heat, solvents, and abrasion. The finish can be burnished to a mirror-like gloss or rubbed down to a smooth, satin finish with steel wool and wax. An excellent finish for marquetry as it does not darken light-coloured veneers and does not yellow or craze on ageing. It dries within 2 hours and the finish is highly durable, heat resistant, resistant to impact, abrasion, and solvents. It enhances the colour of the wood. The coating is almost colourless, but some woods may darken slightly.
This guide is for anyone looking to apply a durable, clear finish to wood, hardboard, cork, or plastic laminates using Rustins Tough As Plastic Coating. The coating offers excellent adhesion and resistance to heat, solvents, and abrasion, enhancing the natural color of your material. Be aware that while the finish is almost colorless, it may slightly darken some woods.
All features
Brand
Rustins
Extended Product Information
FAQs
What is the coverage area per liter?
Coverage varies depending on the surface and application method; refer to the product label for specific details.
Can I use this product on floors?
Yes, it is suitable for floors, provided the surface is properly prepared.
How many coats are recommended?
Two to three coats are generally recommended for optimal durability.
What should I do if the coating is too thick?
Thin the coating with the appropriate thinner according to the manufacturer's instructions.
How long does the finish last?
The finish's lifespan depends on the use and care, but it provides durable protection for a long time.
Can I apply this over an existing finish?
It is generally recommended to remove any existing finish before applying Rustins Tough As Plastic Coating to ensure proper adhesion.
What safety precautions should I take?
Work in a well-ventilated area, wear appropriate safety gear (gloves, eye protection), and follow the safety instructions on the product label.
Troubleshooting
Coating is not drying properly.
Ensure the room temperature is within the recommended range. Check the mixing ratio and ensure the hardener has been properly mixed.
Surface feels rough after drying.
Lightly sand the surface with fine-grit sandpaper and apply another coat of lacquer.
Coating is not adhering well.
Ensure the surface has been properly prepared (cleaned and sanded). Check the expiration date of the product.
Pros and Cons
Pros
Provides a highly durable and protective finish.
Enhances the appearance of the underlying material.
Resistant to heat, solvents, and abrasion, increasing longevity.
Fast drying time allows for efficient project completion.
Suitable for a wide range of materials and applications.
Cons
May slightly darken some wood types.
Requires mixing two parts, adding an extra step to the application process.
Setup, Compatibility & Care
Preparation: Ensure the surface is clean, dry, and free from any previous coatings or contaminants. Lightly sand the surface if necessary.
Mixing: Mix the two parts of the lacquer according to the manufacturer's instructions immediately before use.
Application: Apply the lacquer evenly using a brush, roller, or spray, following the grain of the wood.
Drying: Allow to dry for the recommended time (approximately 2 hours) before applying additional coats. Lightly sand between coats for a smoother finish.
Compatibility: This product is compatible with wood, hardboard, cork, and plastic laminates. Always test on a small, inconspicuous area first to ensure compatibility.
Care: Clean the finished surface with a damp cloth and mild detergent as needed. Avoid abrasive cleaners.
Amazon£30.63Visit shop 
eBay£32.99Visit shop 
