Johnstone's Garage Floor Paint - White - 750ml

Johnstone's Garage Floor Paint is suitable for concrete floors, tiles, brickwork, wood, cement, and stone surfaces, provided they are properly prepared.

Clean the surface thoroughly to remove dirt, grease, and any loose particles. For existing painted surfaces, lightly sand to provide a key.

The number of coats required will depend on the surface and the desired finish. Always follow the manufacturer's instructions on the product label.

Drying times vary. Refer to the product label for specific drying times between coats and before use.

Clean the floor with a mild detergent and water. Avoid abrasive cleaners.

Yes, Johnstone's Garage Floor Paint is designed to resist oil and grease spills.

While designed for garage floors, it can be used on any suitable concrete, tile, brickwork, wood, cement, and stone surfaces as long as the surface is prepared properly.

Ensure the surface was properly prepared (clean, dry, and free of contaminants) and lightly sand glossy surfaces. Check the product label for correct application instructions.

Make sure the surface was thoroughly cleaned and primed if necessary. Ensure the paint is fully dry before subjecting it to heavy use.

Ensure paint is properly mixed before application, and apply an even coat using a roller or brush suitable for the surface.