Johnstone's Garage Floor Paint - Tile Red - 2.5L

It is ideal for all concrete floors. It can also be used on properly prepared tiles, brickwork, wood, cement, and stone surfaces.

The paint offers a semi-gloss finish.

The floor must be clean, dry, and free from grease, oil, and loose debris. Concrete may need etching. Ensure the surface is fully dry before application.

Drying times can vary based on temperature and humidity. Typically, it is touch-dry within a few hours, but recoating and full curing will take longer. Refer to the product can for specific times.

While it can be used on exterior concrete surfaces like driveways, it is primarily designed for the conditions found in a garage environment. Durability on exposed exterior surfaces may vary.

The paint is designed to resist oil and grease spills. Clean up spills promptly with mild detergent and water.

Yes, provided the old coating is sound, clean, and properly prepared. If the old coating is peeling or damaged, it must be removed first.

Ensure the surface was properly cleaned, degreased, and potentially etched before application. Verify that no moisture was present.

Stir the paint thoroughly. Apply in thin, even coats using a quality roller or brush. Avoid over-brushing. Ensure consistent application speed.

This can occur in cold or humid conditions, or if applied too thickly. Ensure proper ventilation and appropriate temperature during application and drying. Apply thinner coats if necessary.

Ensure adequate drying and curing time has passed (often several days to a week for full hardness). Reapply a second coat if the first was too thin.