Best current price£11.05from Amazon
Shopping.co.uk recommended and popular offers
Amazon£11.05Visit shop Johnstone's - Gloss Wood & Metal Paint - Black - 750ml | Gloss Finish, Interior & Exterior Wood & Metal, Quick Dry & Non Drip, Low Odour, Water Based Formula, 8m2 Coverage Per Tin
Visit shop
eBay£19.95Visit shop 2x Johnstone's Wood & Metal Interior Exterior Quick Dry Gloss Paint 250ml- Black
Visit shop21 offers from £11.05 - £40.00
View price history by clicking the chart icon.
This guide is for DIY enthusiasts and professionals looking for a durable, quick-drying gloss paint for interior and exterior wood and metal surfaces. The key benefit is a high sheen, contemporary finish with a fast drying time, minimizing disruption. A potential caveat is its water-based formulation, which may require different application techniques compared to oil-based paints. Johnstone's Quick Dry Gloss offers high opacity, a low odour, non-yellowing finish, and is easy to apply, suitable for projects like skirting boards, doors, and radiators.
| Colour | Black |
|---|---|
| Brand | Johnstone's |
It is typically touch-dry in 1-2 hours. Recoating can usually be done after 2-4 hours, but always refer to the specific product instructions as conditions can affect drying times.
This product is specifically designed for wood and metal surfaces. For walls, a different type of paint, such as emulsion or a dedicated wall primer and finish, would be more appropriate.
The approximate coverage is 25m² per litre, but this can vary depending on the surface porosity and application method.
Clean brushes, rollers, and any spills immediately after use with water. Soap and water can be used for more stubborn residue.
No, Johnstone's Quick Dry Gloss has a non-yellowing formulation, which helps maintain its original color and finish over time.
Yes, it is suitable for exterior metal surfaces, providing a durable gloss finish. Ensure the metal is properly prepared and primed for best results.
Yes, it can be used on previously painted surfaces, provided they are in good condition. Lightly sand the existing surface to ensure good adhesion, and clean thoroughly before application.
Ensure the paint is applied thinly and evenly. Drying times can be extended in cold or humid conditions. Check that the surface was properly prepared and that the correct primer was used if necessary.
Apply the paint with even, smooth strokes. Avoid over-brushing. Ensure the paint is stirred well and at an appropriate temperature for application. Consider using a high-quality synthetic brush or a microfibre roller suitable for gloss paints.
Verify that the surface was adequately prepared (cleaned, sanded) and a suitable primer was applied, especially on challenging surfaces like metal or previously painted glossy finishes.
Ensure the product has been thoroughly stirred. If coverage is still insufficient, a second coat may be needed after the first coat is dry, or a coat of Johnstone's Quick Dry Undercoat may be beneficial on some surfaces.
Setup: Ensure surfaces are clean, dry, and free from dust, grease, and loose paint. Lightly sand surfaces to improve adhesion. For bare wood, apply one coat of Johnstone's Quick Dry Undercoat. For non-ferrous metal or previously painted surfaces, a suitable primer is recommended. Stir the paint thoroughly before use.
Compatibility: Suitable for interior and exterior use on wood and metal surfaces. Recommended for skirting boards, doors, radiators, and staircases. Always test on a small, inconspicuous area if unsure about compatibility with existing finishes or substrates.
Care: Clean brushes, rollers, and equipment immediately after use with water. For general cleaning of painted surfaces, use a soft, damp cloth. Avoid abrasive cleaners, as they can damage the gloss finish.
