Setup, Compatibility & Care
Setup
- Preparation: Clean the surface thoroughly, removing any dirt, grease, or loose paint. Lightly sand the surface to create a key for the paint to adhere to.
- Priming (Optional): For best results, especially on bare wood or metal, prime the surface with an appropriate primer.
- Application: Stir the paint thoroughly before use. Apply in thin, even coats, using a brush or roller.
- Drying: Allow 1-2 hours of drying time between coats. The paint should be touch dry within this time.
Compatibility
Johnstone's Quick Dry Gloss is compatible with:
- Interior wood surfaces (e.g., doors, skirting boards).
- Interior metal surfaces (e.g., radiators).
- Exterior wood and metal surfaces.
Care
- Clean up spills and splatters immediately with water.
- Wash brushes and rollers immediately after use with warm, soapy water.
- Avoid using abrasive cleaners on painted surfaces.