Setup, Compatibility & Care Instructions
To ensure the best results with Johnstone's My Colour Paint - Pink, proper preparation, application, and care are essential.
Surface Preparation (Setup)
- Clean the Surface: Ensure all surfaces are clean, dry, and free from dust, dirt, grease, and loose or flaking material. Use a suitable cleaner if necessary, and rinse thoroughly.
- Fill & Sand: Fill any cracks or holes with appropriate filler and sand smooth. Feather out the edges.
- Prime (if needed): For new, bare, or porous surfaces, or if painting over a strong or contrasting colour, apply a suitable primer or base coat. This will ensure better adhesion and truer colour representation.
- Mask: Use painter's tape to mask off any areas you don't want to paint, such as skirting boards, window frames, and light switches.
Application (Compatibility)
- Compatibility: This paint is suitable for a wide range of interior surfaces including walls, ceilings, furniture, and cabinets. It adheres well to plaster, wood, and previously painted surfaces when properly prepared.
- Stir Well: Before use, stir the paint thoroughly to ensure the colour and consistency are uniform.
- Application Method: Apply with a good quality brush, roller, or spray gun. For best results, use synthetic brushes and medium-pile rollers for matt finishes.
- Coats: Apply one to two coats, or more if needed, for full coverage and colour depth. Allow recommended drying time between coats (refer to product label for specific times).
- Even Strokes: Apply paint in even strokes, avoiding overloading your brush or roller to prevent drips and ensure a smooth finish.
Care & Maintenance
- Cleaning Painted Surfaces: Due to its durable nature, surfaces painted with Johnstone's My Colour can typically be wiped clean with a soft, damp cloth and mild detergent. Avoid abrasive cleaners or scrubbing, which can damage the matt finish.
- Touch-ups: For minor scuffs or marks, keep a small amount of leftover paint for touch-ups. Apply carefully with a small brush.
- Storage: Store any leftover paint in a cool, dry place, ensuring the lid is tightly sealed to maintain its quality.