Crosley Voyager Turntable - Purple

The Crosley Voyager Turntable supports three playback speeds: 33 1/3 RPM (for LPs), 45 RPM (for singles), and 78 RPM (for older shellac records).

Yes, it has dual Bluetooth functionality. It features a Built-in Bluetooth Receiver (Bluetooth In) to stream music *from* your phone *to* the turntable's speakers, and Bluetooth Out to stream audio *from* the turntable (your records) *to* external Bluetooth speakers or headphones.

Absolutely! The turntable includes RCA output jacks on the back, allowing you to connect it to an amplifier, receiver, or powered speakers for a louder and potentially higher-fidelity audio experience.

You can select the base speed (33 1/3, 45, or 78 RPM) using the speed selector switch. For fine adjustments, use the adjustable pitch control knob to slightly increase or decrease the rotation speed.

Yes, its lightweight and compact design (H:7.2 x W:13.5 x D:17.3 cm) makes it easy to move around your home or even take with you for portable listening.

The cueing lever allows you to gently raise and lower the tonearm, helping you to precisely place the stylus on the record without accidental drops, which protects both your records and the stylus.

The Crosley Voyager Turntable comes with a 1-year guarantee.

Check that the turntable is powered on and the volume knob is turned up. Ensure the correct input source (Phono or Bluetooth) is selected. If using RCA, confirm cables are securely connected and the external system is on and set to the correct input.

Make sure the turntable is in Bluetooth receiving mode (usually indicated by a flashing light). Ensure your device's Bluetooth is on and it's within range. Try unpairing and re-pairing the device. Disconnect any other devices previously paired with the turntable.

Verify that you have selected the correct RPM (33 1/3, 45, or 78) for the record you are playing. Use the adjustable pitch control knob to fine-tune the speed if it's slightly off.

Ensure the turntable is placed on a perfectly flat and stable surface to minimize vibrations. Check if the record is clean and free of dust or debris. Inspect the stylus for any visible damage or accumulated dirt.

Confirm the turntable is plugged in and powered on. Check the belt if visible (on the underside of the platter) to ensure it is properly seated around the motor pulley and the platter rim. Reset the power by unplugging and re-plugging the unit.

Ensure your external Bluetooth device is in pairing mode. Activate the turntable's Bluetooth Out function (consult manual for specific button/indicator). Keep devices close during pairing. Disconnect other Bluetooth devices to avoid interference.