CT1 Sealant & Adhesive - Brown - 290ml

CT1 typically forms a skin within minutes and is tack-free within a few hours. Full cure time can vary based on bead thickness, humidity, and temperature. Info needed: [specific full cure time details from manufacturer data].

Yes, a key benefit of CT1 is its ability to perform excellently and form strong bonds even when applied to wet or damp surfaces, making it highly versatile for various conditions.

CT1 is listed for kitchen use and is environmentally compliant, being solvent-free and odourless. However, for direct food contact or drinking water applications, always consult local regulations and manufacturer's specific certifications. Info needed: [food grade/potable water certification status].

This specific product is 'Oak'. CT1 is available in a wide range of colors to suit different applications, including Brown, Clear, Grey, Blue, Beige, White, and Silver.

Once cured, CT1 sealant is very difficult to remove. It typically requires mechanical removal by cutting or scraping. For best results, clean up any excess sealant immediately after application before it cures.

Yes, CT1 is paintable. After the sealant has fully cured, you can paint over it with most types of paint to match your desired aesthetic without affecting its performance.

You should avoid using CT1 on PP (Polypropylene), PE (Polyethylene), and PTFE (Polytetrafluoroethylene) plastics, as adhesion to these materials is not guaranteed.

Ensure adequate ventilation in the application area and check that the ambient temperature is within the recommended range for curing. Verify the product's expiry date; expired sealant may not cure correctly.

Thoroughly clean and dry all surfaces before application, ensuring they are free from dust, grease, oil, or old sealant residues. For very smooth, non-porous surfaces, a light abrasion can improve mechanical keying.

Ensure the nozzle is cut at a 45-degree angle to the appropriate bead size for your application. Apply consistent pressure to the sealant gun and use a dedicated smoothing tool or a wet finger immediately after application to create a professional finish.