151 Radiator Enamel - White Gloss

Coverage will vary depending on the surface condition and application method. As a general guide, the 300ML tin should be sufficient for a standard-sized radiator, but it is best to estimate based on the size of the radiator.

Yes, it is designed for use on household water-filled radiators.

Drying times will vary depending on environmental conditions (temperature and humidity), but typically the paint will be touch dry within a few hours. Refer to the product label for specific drying times.

While primarily designed for radiators, the 151 Radiator Enamel can also be used on pipes. It is not recommended for other surfaces.

It provides a glossy white finish.

A primer is not always required, but for best results and to ensure optimal adhesion, consider using a suitable primer designed for metal surfaces. Ensure the primer is compatible with the enamel.

Clean your brushes and rollers with a suitable paint thinner or solvent immediately after use. Dispose of waste responsibly.

Yes, it is heat-resistant, designed to withstand the high temperatures of radiators.

Ensure the surface is properly prepared by cleaning and sanding before application. Make sure the surface is completely dry before painting.

Apply thinner coats and avoid over application. Allow each coat to dry before applying the next one.

Ensure the surface is completely dry and free of contaminants before painting. Do not apply in direct sunlight or in high temperatures.