Rust-Oleum Kitchen Cupboard Paint - Antique White - 750ml

No, this paint is specifically formulated for kitchen cupboards and is not suitable for countertops or other high-wear horizontal surfaces. Using it on countertops will compromise durability and performance.

Generally, a separate primer and topcoat are not necessary for most kitchen cupboards. However, for areas prone to bleed-through (like wood knots), a suitable knotting solution or stain-blocking primer is essential.

The paint is touch dry in just one hour. However, it's recommended to wait at least 4 hours between coats and allow for full curing (typically 7-10 days) before heavy use or cleaning.

This paint provides an ultra-flat matt finish, offering a modern and sophisticated look to your kitchen cabinets.

Yes, once fully cured, the paint creates a durable, easy-to-clean surface. You can wipe it down with a soft, damp cloth and mild detergent.

Yes, you can paint over existing painted cabinets. Ensure the old paint is sound, clean, dry, and lightly sanded to create a good surface for adhesion. Remove any loose or flaking paint first.

> Info needed: [coverage per tin in square meters, typical kitchen cupboard area. This information is not provided in the product description. Users should refer to product packaging for specific coverage rates.]

Ensure the surface was thoroughly cleaned, degreased, and lightly sanded (if glossy) before painting. Poor preparation is a common cause of adhesion issues.

This often occurs with knots in wood. You must apply a suitable knotting solution or stain-blocking primer to these areas before painting to prevent bleed-through.

Ensure you are applying thin, even coats and using a high-quality brush or roller. Over-brushing or applying too thickly can cause an uneven look. Allow proper drying time between coats.

While touch dry in one hour, full cure takes longer. High humidity or low temperatures can extend drying times. Ensure good ventilation and appropriate room temperature during application and drying.

Rust-Oleum recommends two coats for optimal colour and durability. If preferred, additional thin coats can be applied after the recommended drying time between coats.