Snowdon Timber Treated Sleeper - Pack of 5

Pressure treatment is a process that infuses the timber with protective substances to resist rot, decay, and insect damage.

Yes, you can paint or stain the sleepers. Allow the timber to dry completely before applying any finish.

With proper installation and care, these sleepers should last for many years due to the pressure treatment.

Ensure the timber and any fixings used are suitable for the intended use and will not leach harmful chemicals into the soil.

Wane refers to the presence of bark or an absence of wood on the edge of the timber. Untrimmed bark is natural and does not affect the timber's structural integrity.

You'll need a saw, measuring tape, level, drill, screws or nails, and potentially a shovel or post hole digger depending on your project.

Replacement sleepers can be purchased from the same retailer as the original sleepers, or from other timber suppliers.

Ensure proper ground preparation and use adequate fixings. Check if the sleepers are level and properly secured.

If the damage is minor, apply a wood preservative. For severe cases, replace the sleeper.