Regatta Birchdale Waterproof Hooded Shell Jacket - Blue - Size: 10

'Isotex 15000' refers to Regatta's specific waterproof and breathable fabric technology. The '15000' indicates a hydrostatic head rating of 15,000mm, meaning the fabric can withstand water pressure equivalent to a 15-meter column of water before leaking, and a breathability rating of 15,000g/m²/24hrs, indicating good moisture vapor transmission.

This is a shell jacket, so for cold weather, layer a warm insulating piece underneath. Options include a fleece jacket, a synthetic insulated jacket, or a down jacket. The type of insulation depends on the temperature and your activity level.

Yes, you can machine wash the jacket at 40°C. It's important to close all fasteners before washing and wash with similar colours.

After washing, tumble dry on a low heat to reactivate the Durable Water Repellent (DWR) finish. If the water repellency diminishes over time, you may need to reapply a DWR treatment.

No, the technical hood is grown-on, meaning it is permanently attached to the jacket for consistent weather protection.

The inner zip guard prevents chafing against the chin and neck, while the drainage channel helps to direct water away from the main zipper, reducing the chance of leaks.

Articulated sleeves are designed with pre-shaped seams and extra fabric around the elbow and shoulder area to allow for a greater range of motion, ensuring the jacket moves with you without restriction.

Ensure all seams are intact. For ongoing issues, re-applying a seam sealer might be necessary, though this jacket features factory-taped seams for durability.

Gently clean the zipper teeth with a damp cloth and allow to dry. Apply a small amount of silicone-based lubricant or wax to the teeth if needed.

Ensure the garment is not overly layered for the conditions. Check if the internal membrane is blocked by dirt; wash according to care instructions. Ensure pit zips (if applicable on other models) are open.

The Durable Water Repellent (DWR) finish may need reapplication. Wash the jacket according to instructions, then tumble dry on low heat to reactivate the existing DWR. If effectiveness is still low, consider using a spray-on or wash-in DWR re-proofer.