Johnstone's Walls & Ceilings Soft Sheen Paint 2.5L - Purple

This paint is specifically designed for interior walls and ceilings.

While the paint is wipeable, it is not specifically formulated for high-moisture environments like bathrooms. For such areas, a dedicated bathroom paint is recommended. If used in a bathroom, ensure excellent ventilation and consider a suitable sealant.

Drying times can vary, but typically the paint is touch dry within 1-2 hours and ready for a second coat after 2-4 hours. Allow full curing time for maximum durability.

Yes, but you must lightly sand the gloss surface first to create a 'key' for the new paint to adhere to. Clean off all dust after sanding before applying the emulsion.

Once the paint is fully cured, you can gently wipe the surface with a damp cloth and mild detergent. Avoid using abrasive cleaners.

Soft Sheen provides a more subtle and understated sheen compared to Satin, which offers a slightly higher gloss level. Soft Sheen is designed to be softer and more delicate.

Coverage can vary depending on the surface porosity and application method, but typically a 2.5L can will cover approximately 25-35 square meters for one coat.

Ensure the paint has been thoroughly stirred. Apply a second coat if necessary, ensuring the first coat is dry. Check that the surface was properly prepared and primed if needed.

Apply the paint with smoother, even strokes. Avoid overloading the brush or roller. Ensure the paint is applied at the recommended temperature and humidity.

The surface may not have been adequately prepared. Ensure the surface was clean, dry, and free from dust or grease before application. Remove any loose paint and reapply after proper surface preparation.

Color can vary slightly based on lighting and surface texture. Ensure the surface was primed correctly and that adequate coats have been applied for full color depth.