EcoFlow RIVER 3 Plus Portable Power Station - Grey

The EcoFlow RIVER 3 Plus, when combined with its 572Wh Extra Battery 600, provides a total capacity of 858Wh.

It can be fast-charged from 0-80% in approximately 1 hour via an AC wall outlet. Using solar panels (up to 220W), it can charge in about 1.5 hours.

X-Boost technology allows the RIVER 3 Plus to power certain high-wattage heating devices up to 1200W, even though its rated continuous output is 600W. This feature helps it run approximately 90% of common home appliances.

Yes, its ultra-quiet operation, typically less than 30 decibels, makes it perfectly suitable for indoor use in homes, offices, or quiet environments.

The RIVER 3 Plus uses LiFePO₄ (Lithium Iron Phosphate) battery cells, which are rated for approximately 3,000 full charge cycles to 80%+ capacity, ensuring a long operational lifespan.

Yes, the RIVER 3 Plus itself is a component that combines with a 572Wh Extra Battery 600 to achieve its 858Wh total capacity. This expansion uses wireless pogo-pin technology for a seamless connection.

The Uninterrupted Power Supply (UPS) feature provides essential backup power for sensitive electronics. In the event of a power outage, it automatically switches to battery power in less than 10 milliseconds, preventing data loss or interruptions to connected devices like computers or medical equipment.

Ensure the power button is pressed and held for a few seconds. If it still doesn't turn on, connect the unit to an AC outlet to check if the battery is depleted and needs charging. A completely depleted battery might require a few minutes on charge before it responds.

First, check the appliance's power consumption; ensure it does not exceed the continuous 600W output. For heating devices, verify if the X-Boost feature is active and if the device's wattage is within the 1200W X-Boost limit. Also, check the RIVER 3 Plus's battery level; it may be too low to sustain the load. Reduce the load or recharge the unit.

Ensure solar panels are correctly connected and facing direct sunlight without obstruction. Check for dirt or debris on the solar panels. Verify that the input voltage and current from the solar panels are within the unit's specifications (up to 220W). Cloudy weather or improper panel orientation will significantly reduce charging speed.

The cooling fan activates automatically to dissipate heat during high power output or charging. This is normal operation. Ensure the unit's vents are not blocked to allow for proper airflow. If the fan runs excessively and the unit is not under heavy load, contact customer support.