EcoFlow RIVER 3 Plus Portable Power Station - Grey

The base capacity is [Info needed: specific base Wh]. It can be expanded up to 858Wh with an additional EcoFlow RIVER 3 Plus Extra Battery.

It can charge from 0-80% in approximately one hour using AC wall power, and typically reaches 100% in around 1.6 hours. Solar charging time depends on weather conditions and solar panel input (up to 220W).

Yes, the EcoFlow RIVER 3 Plus features a pro-grade Uninterruptible Power Supply (UPS) with a response time of less than 10 milliseconds, making it safe for sensitive electronics like computers and medical equipment.

No, the EcoFlow RIVER 3 Plus is not waterproof. It should be kept away from water, rain, and high humidity to prevent damage.

The X-Boost feature allows the power station to run high-wattage appliances up to 1200W that typically exceed its rated output. This is effective for devices like hair dryers, electric kettles, and some power tools, though performance may vary depending on the appliance.

Yes, the EcoFlow RIVER 3 Plus supports pass-through charging, meaning you can power your devices while the unit itself is being charged by AC, solar, or a car charger.

The power station operates at less than 30 dB, which is considered whisper-quiet. This makes it suitable for use in quiet environments such as bedrooms, offices, or during camping.

Check all cable connections, including the AC wall charger or solar panel connections. Ensure the power outlet is working. If using solar, verify panels are in direct sunlight and correctly oriented.

Confirm the power station is turned on and the specific output port (AC, DC, USB) is activated. Check if the device's wattage exceeds the power station's output limit (600W/1200W X-Boost). Recharge the power station if the battery is low.

The fan might be running to cool the unit, especially under heavy load or during fast charging. This is normal. If the noise is unusual or persistent at low load, ensure vents are not blocked and the unit is in a well-ventilated area.

X-Boost is designed for resistive loads (e.g., heaters, kettles) and some inductive loads. It may not work with all high-wattage appliances, especially those with strict voltage requirements. Try a lower-wattage appliance or a different type of device to confirm X-Boost functionality.