Setup, Compatibility & Care Instructions
Surface Preparation
- Ensure surfaces are clean, dry, and free from loose material, dirt, or dust. Remove any existing flaking paint.
- Treat any existing mould or algae with an appropriate fungicidal wash before painting.
- Fill any large cracks or defects in the masonry with a suitable exterior filler.
- For best adhesion on very porous or powdery surfaces, consider using a stabilising primer, though the paint itself offers excellent adhesion.
Application
- Stir Well: Thoroughly stir the paint before and periodically during use.
- Apply Evenly: Use a brush or roller to apply an even layer of paint.
- Two Coats Required: For optimal protection and finish, apply a minimum of two coats.
- Recoat Time: Allow approximately 4 hours drying time between coats. The paint is rainproof after 30 minutes.
- Coverage: One 5L can typically covers up to 15 m² per coat, depending on the surface porosity.
Compatibility
This paint is specifically formulated for use on:
- Brick
- Concrete
- Pebble-dash
- Render
It is suitable for all types of exterior masonry walls.
Care
- Due to its Stay-Clean Technology and Mould & Algae Resistance, this paint film requires minimal maintenance. For general cleaning, a gentle wash with water can be performed if needed, but harsh abrasives are not recommended as they can damage the finish.
- Ensure proper ventilation in the painted area during and after application to aid drying and reduce odour.