Ronseal Thompson's One Coat Damp Seal - White - 250ml

Allow 4 hours between coats and a further 4 hours after the second coat before decorating.

Yes, it can be used on most interior surfaces. Make sure to prepare the surface properly before application.

Sanding is generally not required unless the surface is very glossy or has loose paint. However, lightly sanding can improve adhesion.

Coverage is up to 7m/L, but this can vary depending on the substrate's porosity.

Wash the affected area with soap and water. If irritation persists, seek medical advice.

Yes, applying multiple coats can improve stain blocking and durability.

Clean brushes and rollers immediately after use with water.

Ensure a single, even coat of Ronseal Thompson's One Coat Damp Seal was applied. Allow sufficient drying time before painting. Consider applying a second coat if the stain is particularly stubborn.

Ensure the surface is clean and free of contaminants. Lightly sand the surface if necessary to improve adhesion. Make sure the damp seal is completely dry before applying the top coat.