Zinsser Gardz - White - ZN7160001D1

It is ideal for porous and challenging surfaces, including chalky, crumbling surfaces, textured finishes, damaged drywall with torn paper, and surfaces with old wallpaper adhesive.

It is touch dry in 30 minutes and can be recoated after 3 hours.

You can apply Zinsser Gardz - White using a brush, roller, or spray equipment.

Yes, Zinsser Gardz - White is a water-based product known for its low odour during application.

Cleanup is easy with soap and water, provided you clean tools and spills immediately before the product dries.

It offers coverage of up to 10 square meters per litre, depending on surface porosity and application method.

Yes, it has good alkali resistance, making it suitable for high pH surfaces.

Ensure the product is applied evenly and not too thickly. Use appropriate application tools (e.g., a good quality roller for smooth surfaces). Overlap slightly with each pass.

Check environmental conditions. High humidity or low temperatures can extend drying times. Ensure good ventilation. Avoid applying too thick a coat.

Ensure the surface was properly cleaned and loose material removed before application. Allow adequate penetration and drying time before testing the surface. A second, thin coat might be necessary for extremely chalky surfaces.